BSXVK - 10 42214 INT LTX SG WHITE

  • MSDS: BSXVK
  • Manufacturer: VALSPAR CORP
  • Product Name: 10 42214 INT LTX SG WHITE
  • National Stock Number: 8010-00N042562
Product Identification

Product ID:10 42214 INT LTX SG WHITE
MSDS Date:03/07/1990
FSC:8010
NIIN:00N042562
MSDS Number: BSXVK

Responsible Party
VALSPAR CORP
1101 THIRD STREET SOUTH
MINNEAPOLIS, MN 55415
US

Emergency Phone: 612-332-7371;800-228-5635

Info Phone: 612-332-7371

Cage: 13374

Contractor
VALSPAR CORPORATION
MINNEAPOLIS, MN 55415 US

Telephone: 612-332-7371/888-345-5732

Cage: 23526

Ingredients

SILICA, CRYSTALLINE - QUARTZ; (QUARTZ)

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: <1%

OSHA PEL 0.1 MG/M3 RDUST

ACGIH TLV: 0.1 MG/M3 RDUST


AMMONIA (SARA III)

CAS: 7664-41-7

RTECS: BO0875000

Fraction By Weight: <1%

OSHA PEL 35 PPM STEL

ACGIH TLV: 25 PPM;35 STEL

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS


SILICA, CRYSTALLINE-QUARTZ; (SILICON DIOXIDE)

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: <1%

OSHA PEL 0.1 MG/M3 RDUST

ACGIH TLV: 0.1 MG/M3 RDUST


TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 20%

OSHA PEL 10 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST


SILICA

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 1%

OSHA PEL 10 MG/M3 (MFR)

ACGIH TLV: 10 MG/M3 (MFR)


PROPIONIC ACID, 2-METHYL-,MONOESTER WITH

CAS: 25265-77-4

RTECS: UF6000000

Fraction By Weight: 1-2%


WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 45 - 50%


1,2-PROPANEDIOL; (PROPYLENE GLYCOL)

CAS: 57-55-6

RTECS: TY2000000

Fraction By Weight: 5%


VINYL ACRYLIC RESIN; (VINYL ACRYLIC COPOLYMER)

CAS: 25067-01-0

Fraction By Weight: 20%

Hazards

LD50 LC50 Mixture:NONE LISTED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: NONE KNOWN. CHRONIC: NONE
KNOWN.
Explanation of Carcinogenicity:SILICA, CRYSTALLINE-QUARTZ: IARC
MONOGRAPHS, SUPPLEMENT, VOL 7, PG 341, 1987: GRP 2A. NTP 6TH ANNUAL
REPORT ON (SUPDAT)
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:ANY RESPIRATORY OR SKIN CONDITION.

First Aid

First Aid:INGESTION: GET MEDICAL ATTENTION IMMEDIATELY. INHALATION:
REMOVE PERSON FROM EXPOSURE AREA. IF BREATHING HAS STOPPED, USE
MOUTH-TO-MOUTH RESUSCITATION AND GET MEDICAL ATTENTION. EYE: FLUSH
WITH WATER FOR AT LEAST 15 MINUTES. SKIN: WASH WITH SOAP AND
WATER.

Fire Fighting

Flash Point Method:TCC
Flash Point:205F,96C
Lower Limits:3%
Upper Limits:13%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, AND/OR WATER
FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . CONTAINERS EXPOSED TO FIRE SHOULD BE KEPT
COOL WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:VENTILATE AREA. REMOVE SPILLS WITH INERT
ABSORBENT.
Neutralizing Agent:NONE LISTED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
USE. DO NOT STORE ABOVE 120F. KEEP FROM FREEZING. EMPTY CONTAINERS
MAY CONTAIN PRODUCT RESIDUE.
Other Precautions:DO NOT CUT, PUNCTURE OR WELD CONTAINERS. ALL LABEL
WARNINGS MUST BE OBSERVED UNTIL CONTAINER HAS BEEN CLEANED,
RECONDITIONED OR PROPERLY DISPOSED OF.

Exposure Controls

Respiratory Protection:WEAR APPROPRIATE, PROPERLY FITTED NIOSH/MSHA
APPROVED RESPIRATOR DURING AND AFTER APPLICATION UNLESS AIR
MONITORING VAPOR/MIST LEVELS ARE BELOW APPLICABLE LIMITS. FOLLOW
RESPIRATOR MANUFACTURERS DIREC TIONS FOR RESPIRATOR USE.
Ventilation:REQUIRED WHEN SPRAYING OR APPLYING IN CONFINED AREA.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:USUAL CLOTHING FOR PAINTING OPERATIONS.
Work Hygienic Practices:NONE LISTED BY MANUFACTURER.
Supplemental Safety and Health
EXPLANATION OF CARCINOGEN: CARCINOGENS, 1991: ANTICIPATED TO BE
CARCINOGEN.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:24.0 @ 77F
Vapor Density:7.4
Spec Gravity:1.27
Evaporation Rate & Reference:4 (BUTYL ACETATE=1)
Solubility in Water:NO
Appearance and Odor:NORMAL FOR COATINGS PRODUCT.
Percent Volatiles by Volume:63.25

Stability

Stability Indicator/Materials to Avoid:YES
AVOID WATER-REACTIVE MATERIALS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:CARBON DIOXIDE/MONOXIDE, METAL OXIDES.

Disposal

Waste Disposal Methods:DISPOSE IN CHEMICAL DISPOSAL AREA OR IN A MANNER
THAT COMPLIES WITH LOCAL, STATE, AND FEDERAL REGULATIONS. DO NOT
INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.